Handheld
sMS1204 series Powder Moisture Teller
[Introduction] [Datasheet]
|
H-BD5sMS1204
Moisture Meter for Solid Powder
RF attenuation.
Special designed for powder material application. Suitable to test
moisture of Ceramics and earth, Chemicals, Cements, Coal,
Corn&Grain, Cotton,
Fermentation Products, Fertilizer, Foods processing Particles,
Glass materials, Mineral powder, particle Polymers, Pharmaceuticals,
particle Resins, particle Dyes, Sands,Soil,Solid lubricants, and other powder chemicals.
|
Type |
Application
Samples |
Range |
LDL |
Accuracy |
Sample
temperature |
H-MS1204poke |
Dia...
0.5 to 10mm.Powder, grain, particle (meshes to f 10mm), colloid,
thick fluid, truss etc. |
0-100% |
0.1 |
±
1.0%FS |
0-100℃ |
H-MS1204paw |
Dia..
0.5to 6mm.Powder, grain, particle, colloid, thick fluid, truss,
lump, block, chunk, etc. |
0-100% |
0.1 |
±
1.0%FS |
0-100℃ |
H-MS1204Spoon |
Dia..
1-4mm Grain, Particle with a sampling spoon |
0-40% |
0.1 |
±
1.0%FS |
0-100℃ |
H-MS1204Disc |
powder
and lose samples with density compensation by press |
0-40% |
0.1 |
±
1.0%FS |
0-100℃ |
H-MS1204F |
Wood,
plate materials. Surface detect to 1cm deep |
0-40% |
0.1 |
±
0.5%FS |
0-100℃ |
H-MS1204N |
Needle
alike, used to hard solids. to test when inserted, for soil etc. |
0-40% |
0.1 |
±
0.5%FS |
0-100℃ |
H-MS2100
Moisture&water activity Analyzer [Introduction] [Datasheet]
|
H-MS2100Wa Water activity hygrometer
The
active part of moisture content and, therefore, water activity,
provide better information than the total moisture content regarding
the micro-biological, chemical and enzymatic stability of perishable
products such as foods and seeds. For similar reasons, water activity
is equally relevant in the pharmaceutical industry where it provides
useful information regarding the cohesion of tablets and pills, or the
adherence of coatings. Water activity can be directly compared with
the relative humidity of the ambient air to prevent dimensional
changes in a product (paper, photographic film), to prevent
hygroscopic powders (powdered sugar, salt) from caking or turning into
a solid block, etc
Water activity can be used with some products
(mostly synthetic products) as a means of indirectly measuring the
total moisture content. This requires developing sorption isotherms to
this purpose. Sorption isotherms are graphs that provide the
relationship between water activity and moisture content at constant
temperature. For most natural products, repeatable sorption isotherms
cannot be reliably developed and water activity should be regarded as
separate from moisture content.
Series accessories completes
H-MS2100Wa of versatile utility to test gas, liquids,
and solids with one analyzer.
- Specifications
- Aw Range: 0.03-1.00
- Moisture Range:100ppm to 100%
- Accuracy: 0.015Aw (<+/-0.3°C, at
room temperature )
- Repeatability:< 0.005 Aw (<0.1°C,
at room temperature)
- Temperature: -20 to 85°C; -50 to
200°C
- Instrument environ: -10 to 60°C; 0-99%RH
- Battery supply
- 3 mode
to test:
- SMART:
accelerated water activity measurement with automatic end of
measurement.
- NORMAL:
conventional water activity measurement with automatic
detection of equilibrium and automatic end of measurement
- STANDARD:
water activity and temperature measurement, limited to just
indicating the values and the trend of the values
- Test time: 2~5 min Typical at Smart:
|
H-MS4810DRS-NIR
Moisture Analyzer [Introduction]
[Datasheet]
|
High resolution and selective moisture
analyzer, both for solids and liquids
Features
- Instant Measurement
- Non-Contact
- Non-Destructive
- Versatile usage
Application
- Chemicals,
Ink
- Pulp/Paper
- Pharmaceuticals
- Food, Beverages and Dairy
- Agriculture Grain, soil, woods,
fruits, Greenstuffs
-
Cement
and other materials
-
Cosmetics
and Beauty Products
- Lubricant Oils, machine oils, fuel
oils
- Plastics, polymers
|
|