Hand
held Single Gas Analyzer
Keep
better accuracy and reliability under limited interfering gases
Ref: HBD5gsIntE
Application Guide:
HBD5gas is always embedded
with selective gas sensor for application test of specified gas,also
it could be expanded to test of some other similar or correlated gases as if it
is existed in single gas. If you find out that there are two more gases of your
user’s gas listed in the usage list of this sensor, that means there is cross
interference among these 2 gases when you are going to test the user’s mixture
gases. If separated analysis is pursued
or emphasized, you have to choose pGas2000 series for better solution,
or other more selective instrument.
For more wide single gas
detect, refer to HBD5LEL, or pGas200VOC
l
Based on CPU Intelligence
l
Rapid Test
l
100 frame Data log
l
LCD 2x16 Display
l
RS232/485 Communication
l
Full Function Keypad Operation
l
Memo Driven Software
l
User Configured Analyzer
l Temperature compensation embedded.
l Dissolved gas analysis supported
u
Extended gas
parameters available
u 2 phase application supported (gas and water dissolved gas)
l
Industry process monitor
l
Scientific laboratory experients
l
Field project smart test
l
LCD 2×16LCD
Display
l
RS232/RS485
serial port. Supporting STIMcom / Modbus communication
l
Printer
supported
l
Data store
and read out, or output
l
User
calibration
l
Temperature
compensation embedded
l
Pump and/or Pressure
sensor are optional to installation
l
Electronic
unit: BD5CBD, ADC resolution: ppm of FS
General
information of Electro-Chemical Sensor
l
Repeatability:
1-5% FS
l
drift:
<+/-10% /Year
l
Startup time: <5min
l
Response time: < 1min with 90% of change
l
Sampling pressure:<1.2 kgf/cm2
l
Sampling temperature: -10 °C to 50 °C
Environal
Humidity:
Operating:10 to 90% RH, non-condensing
Storage:0 to 90% RH, non-condensing
Environal
Temperature Range:
N:Operating -10 °C to 50 °C
N:Storage -20 °C to 70°C
BD5CBD Analyzer
Environal Temperature |
-10 to 60 °C |
Environal Humidity: |
10-90% |
Supply: 9V
Rechargeable Cell or AC Adapter
Continuous
running time: >24Hr/ each charge for cell sensor; >1Hr for MMOS or
Combust Sensor.
Standby time: 7
days
Units |
Model |
Quant. |
Information |
Analyzer |
H-BD5gs |
1 |
basic system Full functioned instrument, include Micro-processor and electronics, LCD
and keypad, and basic frames etc. |
Temperature
Sensor |
TM36 |
1 |
Embedded in basic system |
Gas sensors |
|
1 |
Included |
Air Sensor Holder |
GasBar-A |
1 |
Included. Environ dispersion sampling |
Battery |
|
1 |
Included in basic system |
DC Adapter |
|
1 |
Included in basic system, 220V AC to 12 VDC. |
Package Box |
|
1 |
Basic package. as trip box: 275(W)x222(T)x112(H) mm |
Units |
Model |
Quant. |
Information |
Humidity Sensor |
RH2123 |
|
Select |
Pressure sensors |
PS3.5 |
|
select |
Printer |
UP24p |
|
select |
Printer paper |
|
|
Select, 12
coil/each package |
Portable Soft
Case |
|
|
select |
Air pump |
GSuck0.9CFM |
To
suck air into the sensor |
Pipe connector |
GasBar-T |
To
connect to industrial device |
Pressure conditioner |
|
Pressure
reducer kit/Mechanical; by user’s order |
Toxic kit |
ToxicTreat-L01 |
Tools
to collect toxic gas. |
Filter |
|
PM10,PM1.0 filter for particles big than 1 or 10
um. |
Air cooler |
|
For
smoke application. |
http://www.BD-research.com/Products/BD2000/GasSensorListE.pdf
BIG DIPPER TECHNOCHEM INSTITUTE Call:(86)10-8264.0226; 8264.0225; Fax: (86)10-8264.0221; P.o.Box: 603 BDTI Beijing, China 100190 http://www.BD-research.com/ Email: support@big-dipper.us sales@big-dipper.us http://www.BD-research.com/Products/Gas/index.htm