UserID: (gui+y/m/d)

Company details

Date of enquiry:
User Name:
Company:
Address:
Phone:
Fax:
Email:
Web:	(optional)

Measurement requirements

Your Project:……………………

Process Sample:………………….

Analysis Parameter:

Range: mg/L□; other □

Required Accuracy: mg/L□; %reading□; %FS□

Test Aim: Toxic detect ð; Ex Detect ð; Industry Control ð

Process conditions

	Min	Max	Normal	Units
Temperature
Pressure
Flow rate
Density

Composition of the Gas Sample:

Name	CAS No. or Molecular formula	Concentration range possible/ normal data	Fluctuation in process(min to max)	Description to the property

*All components should be listed of those concentration range >1/10 of asked measurement

Physical Status (under process conditions)

Gas □; Gas suspending liquids □; Gas suspending particles □; other………..□;

Anything Special?

Flow aggression / Compatible Materials for contact parts:

Description:…………………………………………………..

Contact Materials Suggestion:

Compatible Metal:316L stainless steel □; Hastelloy - C □; Other : □

Compatible Seals: ………………………………….

Installation

Pipe □; Closed Tank □; Open Channel □; Open Vessel □; Atmosphere □; Portable ð;

Size: ; Plant EM Noise? Yes□ No□;

Fixing Connection

NPT1/2” □; NPT1/4” □; M10 □; other: □

Safety/Hazardous Area requirements

Zone:

Gas Class:

Temp. Class:

*Please specify in NEC or IP standards

Power supply availability

12-24vdc □; 220 vac □; 110 vac □; Other: □

Output

Local display □; Remote display □; 4-20mA current □; other………………….□;

Communication:

Serial Port: RS422/485 □; RS 232 □; CAN □;

Instrument Network:……………..

Instrumental Type Selection:

Economic ；Portable；On-line Transducer；Process Analyzer；

May I know your concept of this purchase?

Does it need the instruments continuously working 24hr? Yes/no;

If yes, you need PGA(self maintenance & calibration) level instrument? □; or just CGA (manual maintenance and calibration) □;

Note: If for research or short time experiment, CGA is ok. If Industrial application, better choose PGA

Could the gas be cooled to room temperature to test? Yes/No □;

if yes, the first condensate happens at ……°C at the possible max concentration □; or the Liquidification point is at……°C.□; …. □;

Note:

1) please pay attention to the concentration element to count the behavior

2) Water/steam is the common element to consider at most cases

3) If there happens any condensation of water/steam or other substances happen, the analysis might be always in fault.

Other Information (Please attach technological materials if necessary):